PCBs的超（亚）临界水催化氧化及还原裂解*

简要分析了多氯联苯(PCBs)的来源及其对环境构成的危害,介绍了PCBs在超（亚）临界水中的反应及其处理效果。分别从超临界水氧化、超临界水裂解及亚临界水还原三个方面阐明了超临界反应过程中PCBs降解的反应路径和降解效率,解释了共溶剂（甲醇、苯）、碱催化剂（Na₂CO₃、NaOH）、氧化剂（NaNO₃、NaNO₂）等对PCBs脱氯和分解的增效作用机理。发现在超临界水氧化与超临界水裂解条件下CH3OH对PCBs降解反应的促进机制有所不同,碱催化剂通过中和反应过程中产生的HCl生成NaCl沉淀导致体系中Cl的含量降低,从而促进脱氯反应的进行。对反应器防腐、处理的经济性方面略作讨论,在总结上述研究工作的基础上提出了PCBs的超临界反应处理技术未来发展的若干研究方向。     

多氯二苯硫醚结构参数和热力学性质的密度泛函理论研究

在B3LYP/6-31G*水平上对209个多氯二苯硫醚(PCDS)系列化合物进行了全优化计算, 得到各分子的结构参数和热力学参数. 研究了这些参数与氯原子在苯环各位置的取代数目和相互位置(N_PCS)之间的关系发现: 分子平均极化率(α)、焓(H $)、自由能(G $)、恒容热容( )和熵(S $)与N_PCS之间有很强的相关性, 相关性系数r²＞0.988, 分子体积(V_m)、最高占据轨道能(E_HOMO)和最低未占据轨道能(E_LUMO)与N_PCS也有较好的相关性, 相关性系数r²分别为0.949, 0.894和0.915. 设计等键反应, 计算了PCDS各异构体的标准生成热(Δ_fH $)和标准生成自由能(Δ_fG $). 根据异构体自由能的相对大小, 求得异构体的相对稳定性顺序.     

多氯联苯的羟基化代谢产物及其内分泌干扰机制

羟基多氯联苯是典型持久性有机污染物(POPs)--多氯联苯在生物体内的主要活性代谢产物,已在许多野生动物和人体内被检出.由于其化学结构与天然雌激素、甲状腺激素十分类似,因此羟基多氯联苯的内分泌干扰效应近年来已开始受到国际上的高度关注.本文对多氯联苯的代谢途径、羟基多氯联苯在生物体内的浓度水平、内分泌干扰及其多种毒性作用机制进行了综述.有关对多氯联苯的活性代谢产物--羟基多氯联苯的深入研究,将有助于进一步揭示多氯联苯的毒性机制,为我国早日建立有效的POPs污染危害评价与早期预警系统提供科学依据.     

高分辨气相色谱/质谱法分析新闻纸和复印纸中的二恶英

随机选择空白的和经过印刷的新闻纸和复印纸,粉碎后用溶剂提取并经多步色谱柱纯化,采用同位素稀释、高分辨气相色谱/高分辨质谱(HRGC/HRMS)联用技术分析了其中的二含量。结果表明:新闻纸中二的总量高于复印纸,但是毒性当量却低于复印纸;经过印刷的新闻纸和复印纸中二的含量均高于空白的新闻纸和复印纸;新闻纸和复印纸中相同二异构体的含量 是不同的。空白的和经过印刷的新闻纸中二毒性当量分别为0.48 ng/kg和0.61 ng/kg,而空白的和经过印刷的复印纸中二恶英毒性当量分别为0.74 ng/kg和0.79     

全球性环境污染物多氯联苯的结构-活性相关性研究进展*

本文对全球性典型污染物--多氯联苯(PCBs) 的结构-活性相关性研究的最新成果进行了综述。给出了该类环境污染物的分组归类、结构特征与活性、毒性当量因子的应用和利用有关结构模型阐述毒性机理的研究进展, 并对将来的有关研究方向做了展望。     

松针样品中多氯联苯的分析方法研究

研究了松针中多氯联苯（PCB）质量比测定方法。用硅胶预处理柱处理样品,加标回收实验结果表明回收率在90％左右。分别测定了不同地区的松针样品中PCB的质量比,据此可评价不同地点的PCB污染程度。样品预处理和分析方法简单、可靠、易行,重现性好。     

Determination of 26 polychlorinated biphenyls congeners in soil samples using microwave-assisted extraction with open vessel and gas chromatography

A procedure focused on microwave-assisted extraction in open vessel (MAE-OV) and gas chromatography with electron capture detection (GC-ECD) was used for the determination of 26 congeners of polychlorinated biphenyls (PCBs) in soil samples. The limit of detection (LOD) and limit of quantification (LOQ) were evaluated for commercial PCBs mixture Aroclor1260. LOD and LOQ were calculated for each PCB congener, in the ranges (0.03–0.27?ng?g^?1) and (0.11–0.70?ng?g^?1), respectively. After optimization, 26 PCBs congeners were successfully extracted from soil samples with recovery amounts ranging between 84.7% and 117.3% for all PCBs congeners. The evaluated method of MAE-OV showed good separation and extraction of all PCBs congeners from soil samples. Extraction parameters such as solvent choice, power and extraction time were investigated. This study indicated that MAE-OV could be an interesting alternative method to extract PCBs from soils, since it is economical, easy, fast and requires low amounts of solvents.     

A new advanced method for heterogeneous catalysed dechlorination of polychlorinated biphenyls (PCBs) in hydrocarbon solvent

The dechlorination of PCBs with solid hydrazine hydrochloride catalysed by palladium, in an organic solvent, yields biphenyl in short reaction times. The catalyst system can be efficiently reused for several cycles. Ultrasonication of the heterogeneous catalysed reaction increases the dechlorination rate remarkably. The reactivity of the C---Cl bond on the PCB ring are in the order meta>paraortho.     

Congener-specific determination of dioxins and related compounds by gas chromatography coupled to LRMS,HRMS, MS/MS and TOFMS

Their characteristics as persistent organic pollutant and their toxicity (2,3,7,8-TCDD is named as a known human carcinogen) make the dioxins and related compounds a focus of interest in environmental analytical chemistry. In view of the widespread distribution of dioxins in the environment, these compounds must be monitored in several matrices, such as air, effluents, soil, sludge and biological samples. The analytical methodologies are especially difficult owing to the complexity of the mixtures of congeners (210 PCDD/Fs and 209 PCBs) and to the low detection limits required (ppb to ppq). Moreover, time-consuming sample preparation steps are needed owing to the presence of a large number of interfering compounds. The different toxicity of each congener requires the development of congener specific methods. This review of trace dioxin determination by mass spectrometry (MS) includes sample preparation and chromatographic separation. In this Special Feature, the use of different MS techniques such as low-resolution MS (LRMS) and high-resolution MS (HRMS) is discussed in terms of selectivity and sensitivity. The performances of other MS techniques, such as tandem MS (MS/MS) and time-of-flight MS (ToFMS), are compared. Quantification techniques, especially the isotopic dilution method, are also discussed. Conclusions and future perspectives are outlined.